Z touch screen. Livewell pump out

[Cyco]

Anyone have a newer Z19 with the 5" touch screen?

How do you pump out livewells? I only see fill and recirc options, no pump out button to pump water out back of boat.

Thanks.

 

[Cyco]

Figured it out. I didn't see the label to pull recirc valve.

 

[Andrebass]

Did the same thing, couldn't see it either.

 

[z19time]

Do you use the 1-Fish setting where it is supposed to fill the livewell and then automatically shut off and go into recirculation mode? if I use this setting on mine, it never shuts off the fill setting.

 

[Cyco]

Do you use the 1-Fish setting where it is supposed to fill the livewell and then automatically shut off and go into recirculation mode? if I use this setting on mine, it never shuts off the fill setting.

I dont think it does, i hit fish 1, to get it started, but then hit fill (keep pressing to set low, med high refresh rate). Recirc does not bring in fresh water, more for when transporting the fish

 

[Don Smith]

Check and see if the pipe that pumps in will pull in and out! On my Z=7 the inlet becomes the outlet when you pull it out or in. Check that and see if that does it. Hope it works!