thokennedy
New Member
Hello - I was curious if anyone with a Z19 sport (2020) has any luck getting a 7ft pole in the rod locker. Thanks in advance!
I have a 2019 Z19 sport and I have 2 7ft rods in my rod locker. No problem
I also have the 2020 Z19sport and can not fit my 7ft rods in the rod locker I have to put them in the center storage in the floorHello - I was curious if anyone with a Z19 sport (2020) has any luck getting a 7ft pole in the rod locker. Thanks in advance!
Really? I have a 2019 Z19 Sport and I'll be damn if I can put anything but a 6' rod in my rod locker. I'll have to try that again . . .
John,Really? I have a 2019 Z19 Sport and I'll be damn if I can put anything but a 6' rod in my rod locker. I'll have to try that again . . .
I have a Z19 Sport (2020) also. The rod locker tubes are capped off up by the bow. You can get to it by taking off the cover where the trolling motor plugs into. You know... where you can mount a flush graph. I took the cap off of one and had no problem with my 7' pole catching. If it ends up catching just use a sleeve.Hello - I was curious if anyone with a Z19 sport (2020) has any luck getting a 7ft pole in the rod locker. Thanks in advance!
Just came from Bass Pro Shop trying to fit a 7' one piece rod into the rod locker. It did not fit going in straight. Came up about 2" short. May go in at a angle you will have to bend rod. Didn't want to take the chance on breaking the tip. No reel on rod. It hits the bow area just before. I have Z19 sport on order.Hello - I was curious if anyone with a Z19 sport (2020) has any luck getting a 7ft pole in the rod locker. Thanks in advance!
Hey Thanks for the tip. Most of my rods are 7 footers.I have a Z19 Sport (2020) also. The rod locker tubes are capped off up by the bow. You can get to it by taking off the cover where the trolling motor plugs into. You know... where you can mount a flush graph. I took the cap off of one and had no problem with my 7' pole catching. If it ends up catching just use a sleeve.
Also noticed the floor storage locker goes all the way to the bow. Do you guys have any problems with equipment sliding forward?Just came from Bass Pro Shop trying to fit a 7' one piece rod into the rod locker. It did not fit going in straight. Came up about 2" short. May go in at a angle you will have to bend rod. Didn't want to take the chance on breaking the tip. No reel on rod. It hits the bow area just before. I have Z19 sport on order.
Hey Thanks for the tip. Most of my rods are 7 footers.
I have a Z19 Sport (2020) also. The rod locker tubes are capped off up by the bow. You can get to it by taking off the cover where the trolling motor plugs into. You know... where you can mount a flush graph. I took the cap off of one and had no problem with my 7' pole catching. If it ends up catching just use a sleeve.
Enter your email address to join: