Where to mount transducer for 798c SI

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul Welc

Well-Known Member
Joined
Feb 5, 2005
Messages
158
Reaction score
0
Hello all, I'm trying to decide were to mount the transducer for my Humminbird 798c SI. Should I mount in on the "step" where the original tranducer mount is loacted or a few inches above on the hull. I have seen it mounted both ways. I have a 25 HP motor so speed is not a factor. Greg do you have an opinion? I have a 2005 Tracker PT 175. Thanks



http://groups.yahoo.com/group/sideimaging/photos/album/1962751353/pic/2095965224/view?picmode=&mode=tn&order=ordinal&start=121&count=20&dir=asc



http://groups.yahoo.com/group/sideimaging/photos/album/1962751353/pic/58216921/view?picmode=&mode=tn&order=ordinal&start=121&count=20&dir=asc
 
I have mine mounted the way it is shown in the first photo you refer to on my PT 190 TX. I get good depth readings even on plane at WOT.
 
Back
Top