12v to 24v

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joshua hall

Member
Joined
Mar 24, 2013
Messages
11
Reaction score
0
will the wires going to the plug hold up 24v and i am staying with motorguide .
 
They should hold up just fine, amperage draw is your concern, and with the higher voltage, amp draw normally drops a bit.

 
The answer I got when I put my 80 Fortrex on was no. Unless I bought a hell of alot smaller motor. 10guage wire is what I had on mine from the factory. It is not worth the boat burning after spending a G on a motor, to scrimp on $100 upgrade. Wire was about $60 then the Marinco plug and socket, and curcuit breaker. Found deals on-line. Good luck was the best upgrade I have made to the boat to date.

Bill

 

Latest posts

Back
Top