TrepMan
Well-Known Member
- Joined
- Jun 30, 2000
- Messages
- 9,215
- Reaction score
- 2
Hey Gang, well Dan and his dog (that's me!!) hit the water today, our best trip yet this year, over a dozen bass, and some crappie and a 7+lb Striper thrown in! Striper got named DINNER at the Trepper household, and Beka said "that is one Tasty fish!". Darn striper attacked my favorite Mini-me spinnerbait and bent the heck out of it, I did straighten it out and catch a nice 15 inch spot on it a few mins later, caught a few on a 1/4oz round jig and worm from Backwaters, and a few on a crank bait, Dan got all his spots in crankbaits, so we could not find a real pattern, and the few 1lb + crappie that attached our crankbaits and jig/worms were a nice addition.
After ripping lips all morning, Dan and I set about to install keelshields on both our boats. It took about 2 hours in total for both, working together with Beka supervising, and the boys "helping"!!
One thing we noticed was the 2 Keelshields (one 5ft black the other 7ft black) had 2 completely different set of directions, including one having a Roller, and the other having not only a squeegee instead of a roller but an "adhesive activator" that the 5ft didn't and didn't reference in the directions at all, and the 5ft came with a tube of 3m clear silicone sealant and the 7ft did not. So I wonder if we either got 2 different years (since the directions were also signifigantly different, but basicaly similar), or is the 5ft and 7ft that different??. So we installed them as each specific set of directions specified, and off we go!! Both Keelshields are black so on my black bottom Nitro you can't see it and on Dan's dark Blue bottom you can barely see it.
Here's a shot of our boats, all we need now is some Keelshield Hats or shirts - Hint Hint!!! LOL
After ripping lips all morning, Dan and I set about to install keelshields on both our boats. It took about 2 hours in total for both, working together with Beka supervising, and the boys "helping"!!
One thing we noticed was the 2 Keelshields (one 5ft black the other 7ft black) had 2 completely different set of directions, including one having a Roller, and the other having not only a squeegee instead of a roller but an "adhesive activator" that the 5ft didn't and didn't reference in the directions at all, and the 5ft came with a tube of 3m clear silicone sealant and the 7ft did not. So I wonder if we either got 2 different years (since the directions were also signifigantly different, but basicaly similar), or is the 5ft and 7ft that different??. So we installed them as each specific set of directions specified, and off we go!! Both Keelshields are black so on my black bottom Nitro you can't see it and on Dan's dark Blue bottom you can barely see it.
Here's a shot of our boats, all we need now is some Keelshield Hats or shirts - Hint Hint!!! LOL