Hey Jim......

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bryan Fary

Well-Known Member
Joined
May 5, 2003
Messages
347
Reaction score
1
What hole position is your transome saver on. Mine was on the 1st hole which only had the engine about 8" of the ground. I have since put it in the 3rd hole raising is up quite a bit, but it almost seemed too high then. Just was curious which hole position yours is on.



Bryan
 
I think mine is on the second hole, i would have to check. I did have to raise mine up because it would scrape when i pulled the boat out of the driveway, mine has a slope to it and it would hit the skeg a bit. if you want i will check tonight, i have to take the stupid brake actuator apart again because its leaking so i will be out there anyway.
 
I had mine on the 3rd hole and thought it was too high so I now have it on the 2nd hole and it looks about right. Just was wondering if you have had any troubles with the skeg with it being on the 2nd hole.



thanks,

bryan



 
Mines fine like that. it clears the driveway and has never hit anything in the road. even on the lowest hole it would be ok, my buddies triton runs about 8" off the ground and its never hit anything.
 
Back
Top