J Jeff Ross New Member Joined Jul 22, 2012 Messages 3 Reaction score 0 Jul 22, 2012 #1 Does anyone know the grade of aluminum tracker uses on pro-team 175 hull? (2006) Thanks
R Rich Eder2 Well-Known Member Joined Jul 28, 2006 Messages 288 Reaction score 0 Jul 22, 2012 #1 Its 5052 marine grade. Also has magnesium in it I think for stain resistance.
T TOMMY RICH Well-Known Member Joined Jul 19, 2002 Messages 9,278 Reaction score 0 Jul 23, 2012 #1 Keep this in mind. Although TM advertises .100 aluminum, it's not everywhere. Alot of areas aother than than the outer hull are .080. and less.
Keep this in mind. Although TM advertises .100 aluminum, it's not everywhere. Alot of areas aother than than the outer hull are .080. and less.
R Rich Eder2 Well-Known Member Joined Jul 28, 2006 Messages 288 Reaction score 0 Jul 23, 2012 #1 We don't advertise any but the hull. And it is .100
T TOMMY RICH Well-Known Member Joined Jul 19, 2002 Messages 9,278 Reaction score 0 Jul 24, 2012 #1 Well now if you want to get technical, there are areas on the hull that I questioned it being .100 thick and I was right. I'll go back and check my records as to where.
Well now if you want to get technical, there are areas on the hull that I questioned it being .100 thick and I was right. I'll go back and check my records as to where.
