trailer bearings

[Mike Moss]

Anybody have any idea what size bearings are on the trail star trailer.Im adding brakes and need to know what size they are.Its a 750nx trailer if it helps.If all else fails I will just pull and measure.Thanks

 

[Bill Gintzel]

Where are you buying your brakes? Champion Trailer told me what size my bearings were when I ordered my brakes. You can also verify with Trailstar thru the Tracker Website.

 

[TOMMY RICH]

Should be 1 1/16"....

 

[Bill Gintzel]

My trailstar uses 68149 inner 1 3/8 and 44649 outer 1 1/16. If your spindle is tapered and I bet it is then these should be the sizes.

 

[Mike Moss]

Thanks guys.I looked at the out side bearing and it has the same numbered bearing that the kit requires.I ordered the kit and a quick disconnect line for the swing away tongue from champion today.My truc pulls the boat without any problem.It just dosent stop with the authority I would like in a panic stop.Thanks again.Nice website and a bunch of nice folks.

 

[Bill Gintzel]

Congratulations. Take your time with the installation and make sure you bleed them properly. If they are disc, make sure the solanoid is installed and hooked up before you back up. It makes a LOT of difference in your package performance and I'm sure you will be impressed.