Tony Payne
Well-Known Member
- Joined
- May 16, 2002
- Messages
- 2,077
- Reaction score
- 0
So - Decided it was time to clean and re-pack my bearings... in doing so, decided to replace the disc brake pads while I was at it.
Local Marine shop doesn't have them - local trailer shops don't have them.
So - If your Rotors/Hubs are stamped UFP - and your calipar looks like this:
You can mail order them here :
http://store.pacifictrailers.com/index.cfm?fuseaction=catalog.prodInfo&productID=416&categoryID=48
OR, you can go to the local auto parts shop and ask for a set of pads for the 1991 Dodge Spirit. You'll have to reverse them (inners go out, outs go inside next to the calipar) and remove the little metal springies, but they fit fine.
Took me a week to run those down - hopefully this will save someone else a little time.
Local Marine shop doesn't have them - local trailer shops don't have them.
So - If your Rotors/Hubs are stamped UFP - and your calipar looks like this:
You can mail order them here :
http://store.pacifictrailers.com/index.cfm?fuseaction=catalog.prodInfo&productID=416&categoryID=48
OR, you can go to the local auto parts shop and ask for a set of pads for the 1991 Dodge Spirit. You'll have to reverse them (inners go out, outs go inside next to the calipar) and remove the little metal springies, but they fit fine.
Took me a week to run those down - hopefully this will save someone else a little time.