Help with dash switches!!!

  • Thread starter Anthony Mazzanti
  • Start date
Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 2, 2012
Messages
10
Reaction score
0
TRyin to figure out what my fourth switch is...one is bilge bump, one is livewell, one is dash lights and i dont know what the fourth is.....I have a 2000 nitro 700 lx...also what is the button on the throttle that says "advanced throttle only"??? Thank you!
 
amazz,



The other switch should be 'POWER'. This allows operation of electrical items such as depth finders etc.

The 'advance throttle only' allows for getting higher revs while advancing throttle WITHOUT GOING INTO GEAR. It's used for cold starts or checking engine issues. It does/should have a rev limiter on it also.
 
So isthat something u push off n on.. Or hold down when need??.. Im obviously new to nitros...
 
Hey what you do is push the button in hold it in then put the lever forward. It will then keep the button in, the further you go the more rpms it will do. I use this feature for my cold starts
 
The fourth one is the recirculation switch it aerates and recirculates the water thats in the livewell
 
700lx owner here...



one button is livewell (Manual is top and Auto is bottom)

one button is nav lights (top is nav and anchor light and bottom is anchor only)

one button is beilge (on or off only)

one button is horn (mine doesnt work anymore either)



to drain the livewell you have to flip the valve to empty on the side next to the throttle and to fill the livewell flip that valve to auto.



the "advanced throttle only" button is used for reving up the motor without engaging the prop



there is no "master power switch" unfortunitly...



and there is no recirculation pump either unfortunitly...



Pretty basic boat but really easy to upgrade...
 
Back
Top