Fuse Box Schematic

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul Cullotta

Active Member
Joined
Feb 17, 2004
Messages
43
Reaction score
0
One of my livewell intake pumps stopped working today on my 901. The switch lit momentarily then went out, leading me to believe the fuse blew. I checked all the fuses at the box and none are blown. Does anyone know if there is another location for the fuse. The owners manual has zero information and no schematics (gotta love it !! )



Any help would be very appreciated



Thanks



Paul
 
Not sure about your 901, but on my Champion they are circuit breaker protected and the reset button is right next to the switch?



BF
 
Try to look at the back side of the switch itself. I've had the terminals come loose several times, especially if I make a long run in rough water (lake erie).



I am going to try to remove some of the wire-ties to give me a little more slack in the wiring. Everything was pulled very tight during the installation on my 901.



RoyC
 
Back
Top