Flat Screen LCD in the workshop

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike Newman

Well-Known Member
Joined
May 13, 2003
Messages
228
Reaction score
0
First things first. My daughter and I went out fshing for the first 09 trip yesterday. I did not get as warm as it was supposed to staying around 40, but we went up the hot side of a local cooling lake and found 70 degree water and a few fish. She has been learning to use a baitcaster in prep for trying out for her highschool bass fishing team this spring. Illinois just added bass fishing as a sport and will have tournaments and a state final championship. She is doing excellent with the caster considering her dad gave up and sold the firt one I ever had because I could not get it right. She fished all day even in the wind with limited tangles.



Now back to the actual post. I have a few christmas/birthday bucks left over and was thinking of getting a small flat screen tv to replace the 9" one I currentlyhave in my shop. My question is how do the LCD's handle colder temperatures. My shop is heated and never drops below 40 when I have the thermostat turned down. I usually turn it up to 70 if I am going to be out there working on something. Anybody else have experience with this type of set-up. I am concerned that the colder temps will degrade tv or damamge it? I really would like to find an old tube tv, but not too many garage sales this time of year and the stores don't seem to carry them anymore. Comments?
 
Be careful looking at older analog TV's unless you have cable or dish out there. In Feb you will need a converter box if you have an analog TV and no cable/dish.
 
I dont think you will have any issues with an LCD tv. I would shop the ones you are interested in and check the operating and storage specs before you buy.



I have a small samsung that i just looked at the manual for and the operating temps are 32-104F and the low point on storage is -4F.







 
Think of your TV as you would your fuel tank. Condensation will be your biggest enemy.
 
I have a poloroid 19" in my garage up here in the cold North, no problems with it at all, and they are cheap
 
having grown up watching my father service tvs for nearly 50 years, and now in the computer industry, the two enemies I foresee are 1) rapid change of temp: let the room warm a bit before turning it on... The time left unused in cold room is not a problem. 2) condensation.
 
"the low point on storage is -4F."



It probably wouldn't work at the lowest storage temp, but should do just fine @ the 32F temp. It'll probably have a hard time for the solid state conponents to power up below that, since the bui-in power supply is TINY. Stressing the circuitry below the freezing point simply causes a higher component failure rate - above that should be fine.



Operation above 104F obviously causes higher than normal heat, which ALSO causes a higher failure rate.



Mike E.:):D

 
I see the only real issue being temperature as noted by others, at OPERATION time. Let the room, and the TV, Warm up before operation and you'll be fine.
 
Back
Top