Decal Help

[Chris F.]

Are there any tricks to applying deacls to a rear window of a truck. I want to apply a Mercury marine decal( 6"x18") and a Nitro decal(4"x6") to my window. Thanks Chris F.:unsure:

 

[Dan Sullivan]

Clean window with alcohol and wipe dry. Find your center or another point of reference and mark it with masking tape. Smooth out decal from center to edges trying not to trap air bubbles. If you do, just work them out from the center.

 

[Chris F.]

Thanks, I did an internet search and found that windex and a squeege works great, Thanks. Chris F.

 

[Dan Sullivan]

Cool, yeah I forgot that windex trick. It definitely leaves more room for error.

 

[JR F]

USE A WEE BIT OF SOAP AND WATER Mixture....Or weaken Windex..keep It moist and If you get air bubbles and they are small they will dry out In the sun..JR



If you do it dry Keep smoothing It out before you remove the backing.....

 

[TOMMY RICH]

Also mark it dry on the window with a grease pencil to get straight or centered