Craig i have a question

[Jim B]

I need to get some seals for my trailer. i have a 2000 nitro nx 882. are the seals on these trailers special? ufp the company who makes the trailer makies it seem that way. If they arent who makes them and is there a pn for them. if they are a special type can i order some from you?

 

[Michael Snow]

Get the part number off them and check www.altavista.com and www.google.com. UFP had cross-reference numbers on their site for mine (911 CDC).

 

[James D.]

jim b,



i just changed the hubs on my lx700 (98' model) trailer. It turned out that they were the "tapered" spindles of which I think there was only one size (1 3/8" x 1 1/16" if my memory is right). I thought it easier just to change the whole hub out which came with new seals & bearings installed and pregreased. This particular size is rated at 1,750lbs and I would bet that yours are the same if you have a single axle. I contacted ufp on mine and they refered me to one of their distributers which carries all of their products. below is their info. hope this helps out. Waymires is the distributor and below is their website where you can contact them.





http://www.waymires.com/index4.htm



jd