Correct seat pedistal?

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chris Couch

Member
Joined
Jan 8, 2007
Messages
23
Reaction score
0
I picked up a 97 Nitro 884 about a year ago and had a great time with it this year but have a question on the seat posts. It came with EZ Swivel posts for the seats, but they are extremely difficult to remove from the both the foward & rear decks. Is this normal or do I have the wrong type of seat posts and if so what is the proper posts? This boat was a bank repo so it came as is... Thanks for any suggestions or help.
 
The plastic swells a little. It happens alot. I sanded the post and added a little anti seize.
 
Clean the hole with alcohol and the post. Then hit the post with a wire brush.

Sould be good after that ;)
 
Do what Tee and Troy said but in additon, give it a squirt of Reel Magic. You'll be amazed.
 
Hmmm...never thought about that Harpo.

I have some on my garage bench;)
 
Back
Top