trim hesitates to travel

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

don griffith

New Member
Joined
Sep 21, 2012
Messages
2
Reaction score
0
switch hesitates to make trim go opposite direction. it is more consistent if you already have it going one direction and the bump switch the opposite direction., it will try to work still not consistent. could it be the relays or the switch?

 
Either, but I'd check for ground corrosion impeding continuity at those locations. Clean the terminals and wire attachments and see if that helps. Good luck! ;)
 

Latest posts

Back
Top