Search results

Nitro Owners Forum

Help Support Nitro Owners Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    700 lx motor mount???

    Hello, Had the boat home this weekend, the cavitation plate is level with the bottom of the boat.
  2. J

    700 lx motor mount???

    Will get that measurement next time I'm at the lake, hopefully sunday. Thanks for the help.
  3. J

    700 lx motor mount???

    I had the motor dropped one notch down on the transom at tracker marine. Seemed before the plate was above the bottom line of the hull. I have a 1998 Force 90Hp on it. I need to work on my gauges first, the rpm gauge is all over the place. One minute I am in a stretch of water doing 30mph...
  4. J

    700 lx motor mount???

    Im sorry, its the 90HP force
  5. J

    700 lx motor mount???

    I checked, I originally had a 12.5" x 23 pitch prop from the factory. It was damaged so I replaced it with a Black Max 13" x 19 pitch.
  6. J

    700 lx motor mount???

    Ill check next time i see it, its at the lake storage place. Im thinking its in the 3 hole down on the mount.
  7. J

    700 lx motor mount???

    I changed my prop 3 years ago. The new one has less speed but pull stronger from a dead stop.
  8. J

    700 lx motor mount???

    It porpoising horribly. When its trimmed down enough to minimize the porpoising it torque steers horrible to the right. When I trim up to eliminate the torque steer it starts porpoising again. seems no even balance. Had wondered if the hydrofoil on the motor was amplifying the problem...
  9. J

    700 lx motor mount???

    For anyone with a 700 lx, when looking at the mount position of the motor on the transom, how high is the motor mounted? Mine is mounted through the middle bolt holes. wondering if it is too high.
  10. J

    4 Versus 3 Blade Props....

    Thanks for the advice, I am going to stick with a 3 blade.
  11. J

    4 Versus 3 Blade Props....

    Has anyone switched from a 3 to a 4 blade prop? I have a 90hp Force on my 700lx, and was wondering how it would affect its performance.
  12. J

    Buying A New Prop.....

    Thanks Larry, I've never really noticed an issue with my current aluminum prop. I will say it seems I have to have my motor trimmed most of the way up to hit the 5250 rpm, and it doesn't have much of a hole shot even with a hydrofoil on it.
  13. J

    Buying A New Prop.....

    I am looking at a new prop for my 700lx, It came with a 12.5 x 23p aluminum prop. I have read online that my 90hp force doesn't really have the power for a 23 pitch. I was wondering what props other owners of the 700lx use.
  14. J

    Prop Questions.......

    Thanks for your help, I really appreciate it.
  15. J

    Prop Questions.......

    I need help... I have a 98 Nitro 700lx, I am looking for a new prop. I found two different numbers stamped on the prop... 48 77350 A15 23P was on the side, and 48 77350-C1-23 is where the retaining nut goes. These are the only two numbers I have found, and I can't find anything like this on...
  16. J

    700lx Hull Clearance....

    Yes that's exactly where I am looking at mounting. I hadn't thought about removing the drain, but I will. Thanks for your advice.
  17. J

    700lx Hull Clearance....

    I am looking at adding a seat post plate on the bottom of my 700lx, so I can put one of my fishing seats there so another person can ride along. Does anyone know how much clearance there is under the floor right at the front deck?
  18. J

    New Seats

    Actually looked on line at walmart and found a set that wont be too bad, thanks for the advice.
  19. J

    Gauges Off

    Thanks, i will be going through them again. I found my negative battery lead was loose and heated up quite a bit, so I am wondering if it burnt a bad spot in a line somewhere.
  20. J

    New Seats

    Hi all, has anyone purchased new seats from Bass Boat Seats.com? I am looking at them online and would like some feedback. Thanks
Back
Top